Sharp SD-AT1000W Timer and sleep operation, Setting the timer, Before setting timer

SD-AT1000W

ENGLISH

Timer and sleep operation

Advanced Features and sleep operation -

You can use the unit as an alarm clock by setting the timer.

Before setting timer:

1Set the unit to the correct time (page 18).

If it is not set, you cannot use the timer function.

2Prepare the sound source for playback.

3Store radio stations (page 20).

"Setting the timer

1 Turn the power on and press the TIMER but- ton.

Set the unit to the correct time if "TIMER STANDBY" does not appear.

2 Within 10 seconds, press theorbutton to

select "TIMER SET", and press the ENTER button.

3 Press theorbutton to adjust the hour and then press the ENTER button.

4 Press the or button to adjust the minutes and then press the ENTER button.

The start time is set and the finish time (1 hour later) will be displayed automati- cally.

5 Set the time to finish as in steps 3 and 4 above.

- Timer

6 Switch input with the or button, and then press the ENTER button.

!When you select the tuner, select a sta- tion by pressing the or button, and then press the ENTER button.

!If a station has not been programmed, "NO P-SET" will be displayed.

DIGITAL1 DIGITAL2

TUNER LINE1

LINE3 LINE2

7 Adjust the volume with the or button and press the ENTER but- ton.

Settings are displayed in order and the unit will enter the timer stand-by mode.

Caution:

This unit cannot set the timer of other equipment.

To perform the timer playback using other equipment, you should also set the timer on the equipment separately.

E-27

04/7/21 SD-AT1000W_LAG_E5.fm TINSZA121AWZZ