Sharp operation manual SD-AT1000WGeneral control, Muting, Headphones, Use

SD-AT1000WGeneral control

ENGLISH		" To change the display brightness (2 levels)
		You can switch the display brightness by press-
		ing the DIMMER button.
		Display		Dimmed
		" Volume control
		Main unit operation:
		When the VOLUME control is turned clockwise,
		the volume will increase. When it is turned anti-
		clockwise, the volume will decrease.			.....
		0	1	2		39	40
Use		Remote control operation:
		Press the VOLUME + button to increase the vol-
		ume and the VOLUME - button for decreasing.
forPreparation		" Muting
	controlGeneral- -	The volume is muted temporarily when pressing
		the MUTING button on the remote control.
		Press again to restore the volume.
		" Headphones
		! Before plugging in or unplugging the headphones, reduce the volume.
		! Be sure your headphones have a 6.3 mm (1/4") diameter plug and are between 16
		ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
		! Plugging in the headphones disconnects the speakers automatically. Adjust the
		volume using the VOLUME control.
		! You cannot use the surround feature with headphones.
		! Do not plug in or unplug headphones whilst recording. The sound may skip.

E-17

04/7/21 SD-AT1000W_LAG_E2.fm TINSZA121AWZZ