Sharp SD-AT1000W operation manual Main unit rear panel, Cooling fan

"Main unit (rear panel)

1 2 3 4 5 6 7

8 9 10 11

SD-AT1000W

ENGLISH

Information indicators -

1

2

3

4

	Reference page
1. FM 75 Ohms Aerial Socket	. . . . . . . . . . 10
2. Aerial Earth Terminal	. . . . . . . . . . 10
3. AM Loop Aerial Terminal	. . . . . . . . . . 10
4. Coaxial Digital Audio Input Socket	. . . . . . . . . . 11
5. Cooling Fan	. . . . . . . . . . . 4
6. Speaker Terminals	. . . . . . . . . . . 9
7. AC Power Lead	. . . . . . . . . . 13
8. Subwoofer Pre Output Socket	. . . . . . . . . . 12
9. Audio Line Output Sockets	. . . . . . . . . . 11
10.Audio Line Input Sockets	. . . . . . . 11, 12
11.Optical Digital Audio Input Socket	. . . . . . . . . . 11

The rating label is located on the bottom of the unit.

Cooling fan

This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the opening in this section with any obstacles.

Cooling fan

Caution:

!The unit will get warm whilst being used. Do not touch the warm areas of the unit for prolonged periods to avoid damage to you.

!This unit is equipped with a special function which protects the amplifier circuit from damages. When it is activated, the sound switch is turned off. In this case, set the unit to the stand-by mode and turn on again.

General - Controls and

5

6

7

8

E-4

04/7/21 SD-AT1000W_LAG_E1.fm TINSZA121AWZZ