SD-AT1000W

ENGLISH

Adjusting speaker delay/speaker level

Advanced Features

Adjusting speaker delay/speaker level -

 

-

E-25

When speakers cannot be placed at equal distances, change speaker settings to enjoy surround effects as if they were equally placed.

Example:

If the right surround speaker is 3 m away from the listening position, change settings as shown below (adjust the SR).

FL

CT

FL

CT

FR

FR

SW

 

SW

 

SL

SR

SL

3 m

SR

 

Default setting: 2 m

 

Right surround

 

 

speaker

 

 

 

1In "Speaker delay setting", set the right surround speaker (SR) to 3.0 m.

2In "Speaker level setting", slightly increase the level of the right surround speaker as it is a little farther than others (see page 26).

3In "Test tone", check the sound from each speaker (see page 26).

4When you complete the settings, press the AMP RETURN button twice.

You can return to the previous menu dur- ing operations.

Step 1. Speaker delay setting

By adjusting speaker delay, differences in speaker distance can be corrected. This offers you the sound quality as if the speakers are installed at the same distance from the listening position.

1 Press the AMP SET UP button, and the or button to select "SP DELAY". Then press the ENTER button.

2 Within 30 seconds, press the or button to select the desired speaker.

3 Within 30 seconds, press the or button to select the distance and press the ENTER button.

!You can change the distance in 0.1 m steps.

!To set the distance of other speakers, repeat the operation from step 2.

 

Speaker type

Delay range

Default setting

 

 

 

 

FL

Front speaker (Left)

0.1 m to 9.0 m

2.0 m

 

 

 

 

CT

Centre speaker

0.1 m to 9.0 m

2.0 m

 

 

 

 

FR

Front speaker (Right)

0.1 m to 9.0 m

2.0 m

 

 

 

 

SR

Surround speaker (Right)

0.1 m to 9.0 m

2.0 m

 

 

 

 

SL

Surround speaker (Left)

0.1 m to 9.0 m

2.0 m

 

 

 

 

SW

Subwoofer

0.1 m to 9.0 m

2.0 m

 

 

 

 

Note:

You can also adjust the speaker delay of a subwoofer connected to the SUB- WOOFER PRE OUT socket.

04/7/9

SD-AT1000W_LAG_E4.fm

TINSZA121AWZZ

Page 26
Image 26
Sharp SD-AT1000W operation manual Adjusting speaker delay/speaker level, Advanced Features, Speaker delay setting, Example