Basic, Enjoying, Press the Sound Mode button | Sharp SD-AT1000W

SD-AT1000WEnjoying various sounds (continued)

ENGLISH

Operation	various sounds -
Basic	- Enjoying

E-23

"Listening to sounds with multi-channel

(5.1 ch, etc.)

When connecting the DVD player to the DIGITAL IN 1/2 sockets, you can enjoy Dolby Digital or DTS sounds with spacious effects.

You can also enjoy spacious effects when listening to 2-channel stereo sounds using Dolby Pro Logic .

Whilst the disc is playing, press the MULTI CHANNEL button.

A maximum of 5.1ch surround sound is re- produced to provide three-dimensional ef- fect.

Dolby Pro Logic expands 2-channel stereo sound of CDs, etc. to 5.1 ch.

Surround types can be changed in this mode.

Press the SOUND MODE button.

Each press of the button changes the mode.

The bass level is increased for powerful sound effect.

You can enjoy the original sound as it is.

You can enjoy lively sound by pro- ducing the clear sound.

Soft but powerful sound is achieved even at low volumes.

This mode provides an expansive listening area by emitting 2-chan- nel sound.

You cannot select "SURROUND" if the audio source contains DTS or Dolby Digital signals.

04/7/9

SD-AT1000W_LAG_E4.fm

TINSZA121AWZZ

Image 24

Sharp SD-AT1000W Basic, Listening to sounds with multi-channel Ch, etc, Enjoying, Press the Sound Mode button

Contents

SD-AT1000W IntroductionContents Special notes Accessories PrecautionsSD-AT1000WVolume control General Controls and indicators IndicatorsInformation Main unit front panel Main unit rear panel Remote control GeneralControls Sets the VCR power to on or Stops the cassette Switches the input to TV or VCRSelects the DVD menu Displays the DVD menu Front speaker Centre speakerSubwoofer Bass Reflex Duct Woofer Speaker Terminals Using antislip speaker cushions Speaker functionsCarrying the subwoofer Speaker connection Connecting speaker wires Installing the AM loop aerialSupplied FM aerial Supplied AM loop aerial Audio connections to DVD players, VCRs, TVs, etc ConnectionsPlayers, VCRs, TVs, etc System connections to DVD Using other subwoofer SystemAudio connection to TVs or other equip Ment DVD players, VCRs, TVs, etc Connecting the AC power lead AC power leadConnecting To set the unit to stand-by mode Setting the AM/FM interval To change the AM/FM tuning intervalFor Use Preparation System installation Preparation for Use System installationPlacing the speaker system Magnetically shielded speakers Remote control Battery installation Test of the remote controlUse Headphones SD-AT1000WGeneral controlMuting Use Setting the clock Manual or Auto tuning SD-AT1000WListening to the radioBasic Operation Listening to the radio To erase all the contents of the preset Memory Memorising a stationTo recall a memorised station Listening to the playback sound from DVD players, VCRs, etc Audio signal indicators / Speaker indicators Enjoying various soundsOperation Various sounds Press the Sound Mode button BasicListening to sounds with multi-channel Ch, etc Enjoying Press the Sound Mode button to turn the Bass on or Bass OFF Listening to 2-channel stereo soundsWhilst the disc is playing, press the Stereo button Adjusting speaker delay/speaker level Advanced FeaturesSpeaker delay setting Adjusting speaker delay/speaker level Speaker level setting To end the speaker settingFL CT FR SW SL SR Readjust the speaker levels if not equal Speaker type Level range Default setting Timer and sleep operation Setting the timerTurn the power on and press the Timer but- ton Before setting timer Advanced Features Timer and sleep operation Setting the sleep timer To use timer and sleep operation together Troubleshooting chart Troubleshooting chartSymptom Possible cause Reference References Maintenance Error indicators and warningsOptional accessory Cleaning the cabinet Specifications Specifications SD-AT1000WLAGmemo1 TINSZA121AWZZ SD-AT1000WLAGmemo2 TINSZA121AWZZ Sharp Corporation