Sharp SD-AT1000W operation manual Connecting the AC power lead, Press the ON/STAND-BY button

SD-AT1000W

ENGLISH

connections	the AC power lead -
System	- Connecting

E-13

Connecting the AC power lead

After checking all the connections have been made correctly, plug the AC power lead	" To turn the power on
of this unit into the wall socket.

Wall socket

(AC 220 - 240 V, 50/60 Hz)

Press the ON/STAND-BY button.

If the power does not turn on, check the AC power lead is plugged in properly.

To set the unit to stand-by mode:

Press the ON/STAND-BY button again.

Note:

Unplug the AC power lead from the wall socket if the unit will not be in use for a pro- longed period of time.

04/7/21 SD-AT1000W_LAG_E2.fm TINSZA121AWZZ