Sharp SX76NF100, SX66NF100 Connections, Connecting to a DVD player, Watching DVD playback

Connections

Connecting to a DVD player

The DVD input terminals (COMPONENT IN) on the rear of the TV can be used to input high-quality images from a DVD player.

•The COMPONENT IN terminals support progressive video signal input for playback on the screen.

(SX76NF100)

	DVD input terminals
Green: To Y
Blue:	To PB (CB)
Red:	To PR (CR)
		Red: To AUDIO IN (R)
		White: To AUDIO IN (L)
To colour-difference
(component video)		To audio out
out terminals		(L/R) terminals

DVD player

Connecting the video terminals

Watching DVD playback

DVD input terminals		DVD player
	Y	Y or Y/Y
COMPONENT IN
	PB(CB)	PB(CB) or B-Y/Pb
	PR(CR)	PR(CR) or R-Y/Pr

TV/VIDEO	1 Press TV/VIDEO to select
	“COMPONENT”, DVD input
	screen.

COMPONENT

2 Turn on the DVD player and begin playback.

•When connecting the TV to a DVD player via the COMPONENT IN terminals, the video and audio from the DVD player cannot be output through the AUDIO/VIDEO OUT terminals on the TV.

•Please refer to the operation manual of your DVD player for more information.

•Be sure to fully insert the plugs of the connecting cables into the terminals on the TV set and video equipment. Failure to do so may result in noise.

•Before connecting the cables, turn off the power of the TV set and video equipment.

•Always remove the cables from the terminals by the plugs and not the cables themselves.

40

SX66NF(33-44) Page 40 03.7.30, 9:06 AM Adobe PageMaker 6.5J/PPC