Setting the Reception Mode

Setting the Reception Mode

Your fax has three modes for receiving incoming faxes:

FAX mode:

Select this mode when you only want to receive faxes on your line. The fax machine will automatically answer all calls on four rings and receive incoming faxes.

TEL mode:

Select this mode when you want to receive both phone calls and faxes on the line connected to the fax machine. All calls, including faxes, must be

answered by picking up the fax machine's handset or an extension phone connected to the same line.

TAD mode:

Select this mode when you go out and want the built-in answering system to answer all calls. Voice messages will be recorded, and fax messages will be received automatically (“TAD” stands for “Telephone Answering Device”.)

Setting the reception modeMake sure a document is not loaded in the document feeder, and then

press

RESOLUTION/

until the arrow in the display points to the desired mode.

 

RECEPTION MODE

 

 

RESOLUTION/

TEL FAX

 

RECEPTION MODE

JAN-03 10:30

01

02

03

04

05

06

07

08

09

10

11

12

RESOLUTION/ RECEPTION MODE

TAD

1 2 3

4 5 6

7 8 9

0

13

14

15

16/POLL

17/G1

18/G2

TEL FAX

JAN-03 10:30

TAD

TEL FAX

JAN-03 10:30

TAD

Note: TAD mode cannot be selected unless a general outgoing message has been recorded as explained on page 33.

For more information on receiving faxes in FAX and TEL modes, see Chapter 4, Receiving Faxes. For more information on using TAD mode, see Chapter 2, Using the Answering System.

30