Sharp UX-A1000 Sending a Fax From Memory, Broadcasting (sending a fax to multiple destinations), Note:, 2 Press MEMORY, Press a Rapid Key, 1 Load the document(s)

Sending a Fax From Memory

Sending a Fax From Memory

You can scan a document into the fax’s memory and send the document from memory. This increases transmission speed and allows you to send a fax to multiple destinations in a single operation. After transmission, the document is automatically cleared from memory.

Note: If a power failure occurs while sending a fax from memory, you will need to repeat the operation.

Broadcasting (sending a fax to multiple destinations)

This function allows you to send the same fax to as many as 20 different destinations in just one operation.

♦When sending a fax to multiple destinations, only auto-dial numbers can be used to dial the numbers of the receiving machines.

1 Load the document(s).
• If desired, press	RESOLUTION/	to set
	RECEPTION MODE

the resolution and/or contrast.

READY TO SEND

START/

2 Press MEMORY .3 Select a destination using one of the following methods:Press a Rapid Key.Press SPEED DIAL and enter a 2-digit Speed Dial number.Press or until the name of the destination appears in the display(if no name was stored, the number will appear).

Sending	Faxes
3.

73