Sharp UX-A1000 Note:, Answering with the fax’s handset, Answering on an extension phone connected to the same line

Using TEL Mode

Answering with the fax’s handset

1 When the fax machine rings, pick up the handset.

2 If you hear a fax tone, wait until the	Beep
display shows RECEIVING and then	RECEIVING
replace the handset.

Note: If you have set the Fax Signal Receive

START/

setting to NO, press MEMORY to begin reception.

3 If the other party first speaks with you and then wants to send a fax, press

START/

MEMORY after speaking. (Press before

the sender presses their Start key.)

•When RECEIVING appears in the display, hang up.

START/

MEMORY RECEIVING

Answering on an extension phone connected to the same line

1 Answer the extension phone when it rings.

2 If you hear a soft fax tone, wait until your fax responds (you will hear pronounced, high-pitched tones), then hang up.

Beep

Pronounced, high-pitched tones

80