Sharp UX-A1000 Copy Cut-off, once, Press, twice, Press, twice, Press, once and, once and, If MEMORY IS FULL appears, 3 When you are ready to begin copying, press

Making Copies

3 When you are ready to begin copying, press	COPY/HELP
		.

If MEMORY IS FULL appears...

If you place a large number of originals in the feeder, the memory may become full before all pages can be scanned (the display will show MEMORY

START/

IS FULL). If this happens, press MEMORY to copy the pages that have been

scanned, and then repeat the copy procedure for the remaining pages, including the page that was being scanned when the memory became full.

Copy Cut-off

1

2

3

When making a copy of a document that is longer than the printing paper, use the copy cut-off setting to select whether the remaining part of the document will be cut off or printed on a second page. The initial setting is YES (cut off the remainder). To change the setting, follow the steps below.

Press	FUNCTION once and	twice.	Display:
			PRINT SET-UP
Press	once and	twice.	COPY CUT-OFF
Press	once.		1=YES, 2=NO

4

Press 1 to set copy cut-off to YES (the remaining part of the document will not be printed), or 2 to set copy

cut-off to NO (the remaining part will be printed on a second page).

The display briefly shows your selection, then:

INK SAVE MODE

5 Press to return to the date and time display.

STOP

86