Sharp UX-A1000 FAX mode on TAD failure, once, Press, Press, Press, Press, Press, 3 times, once and, once and, FAX mode), or, 2 to select NO, to select YES (switch to

Optional Answering System Settings

FAX mode on TAD failure

If the memory for recording incoming messages becomes full while you are out, the answering system will no longer be able to record messages. The ON TAD FAILURE setting is used to select whether or not the reception mode will switch to FAX mode when this happens:

♦YES (switch to FAX mode): The reception mode will switch to FAX mode, allowing the machine to continue to receive faxes automatically. With this setting, you can still use the remote commands to listen to your messages and then erase them (see Remote Operations on page 47).

♦NO (do not switch to FAX mode): The machine will answer after 20 rings, after which it will wait to receive a remote command. Most callers will hang up before it answers; however, when you call the machine from a remote location, you can wait until it answers, listen to your messages, and then erase them (see Remote Operations on page 47).

The initial setting is NO . If you want to change the setting to YES, press the panel keys as follows:

1	Press	FUNCTION		once and	once.	Display:
						T.A.D. SETTING
2	Press	once and			3 times.	ON TAD FAILURE
3	Press	.				1=YES, 2=NO
4	Press	1	to select YES (switch to			The display briefly shows
						your selection, then:
	FAX mode), or			2 to select NO.		OGM ONLY MODE
5	Press	STOP	to return to the date and time display.

Answering	Machine
2.

39