Sharp UX-A1000 Recording the transfer message, 2 Press once, 3 Lift the handset, to delete the message.), 1 Press REC/MEMO once and twice, listen to the message, or press

Transfer Function

Recording the transfer message

The transfer message plays when you answer the telephone, and informs you that the call is a transfer call. It can be up to 15 seconds long. To record a transfer message, follow the steps below. The following is an example:

“Hello. This is a transfer call for (YOUR NAME). Enter your remote code number now.”

Display:

1 Press REC/MEMO once and twice.

OGM2(TRANSFER)

2 Press once.

3 Lift the handset.

(If you have already recorded a message, you can press PLAY tolisten to the message, or press

DELETE

to delete the message.)

4	START/
	Press MEMORY and speak into the handset to record the message.

•The transfer message can be up to 15 seconds long. While recording, the display will show the time left to record.

5 When finished, replace the handset or press .

STOP

Answering	Machine
2.

43