Sharp UX-B700 Searching for an auto-dial number, Press Until the name of the other party appears

Sending a Fax by Automatic Dialing

Searching for an auto-dial number

If you don’t remember the Rapid Key or Speed Dial number in which you have stored a full fax or phone number, follow these steps to search for the number.

1 If you are sending a fax, load the document(s).

	• If desired, press		RESOLUTION/	to set
			RECEPTION MODE
	the resolution and/or contrast.
				READY TO SEND
2	Press	Z	) until the name of the other party appears in the
		A (or REDIAL
	display (if no name was stored, the number will appear).
3				START/
	If you are sending a fax, press			MEMORY . Dialing and transmission begins.

•If the transmission is completed successfully, the machine will beep once.

•If an error occurs, the machine will beep three times and print a Transaction Report to inform you of the problem (see page 87).

If you are making a phone call, lift the handset. Dialing begins. (If you

START/

lifted the handset before searching for the number, press MEMORY to begin dialing.)

Sending	Faxes
2.

47