Sharp UX-B700 manual Optional Reception Settings, Fax Signal Receive, Press once and 7 times

Optional Reception Settings

2 If you hear a soft fax tone, wait until your fax responds (you will hear pronounced, high-pitched tones), then hang up.

Beep

Pronounced, high-pitched tones

3 If the fax doesn't respond, or if the other party first talks to you and then

wants to send a fax, press 5 once and twice on the extension

phone (only on a tone dial phone). This signals the fax to begin reception. Hang up.

•The above step is necessary if you have set the Fax Signal Receive setting to NO.

• Your fax will not accept the signal to begin reception ( 5 ) if a

document is loaded in its feeder.

Optional Reception Settings

Fax Signal Receive

Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting.

1 Press FUNCTION once and 3 times. Display:

OPTION SETTING

2 Press once and 7 times.

FAX SIGNAL RX

3 Press once.

1=YES, 2=NO

60