Part Names and Functions
Numbers in 
refer to the main pages in this operation manual where the topic is explained.
Projector
Top View
Power indicator 30·59
STANDBY/ON button 30
For turning the power on and putting the projector into standby mode.
KEYSTONE button 32
For entering the Keystone
Correction mode.
Adjustment buttons 43 ('/"/\/)
For selecting and adjusting
RETURN button 43
For returning to the previous display.
INPUT buttons 34
For switching input mode.
Front View
Zoom knob 33
For enlarging/ reducing the picture.
Tilt dial 31
Height Adjustment 31 button
Adjustment foot 31
Push both sides of the lens cap to attach or remove.
Attaching the lens cap
After putting the lens cap strap on the lens cap, pass the other end of the strap through the hole on the front side of the projector, next to the lens, as shown in the illustration.
30·59 Lamp indicator
59Temperature warning
indicator
35 AUTO SYNC button
For automatically adjusting images when connected to a computer.
44ENTER button
For setting items selected or adjusted on the menu.
34 Volume buttons
For adjusting the speaker sound level.
43MENU button
For displaying adjustment and setting screens.
35ECO+QUIET button
For lowering the noise of the cooling fan and extending the lamp life.
33 | Focus ring |
| For adjusting the focus. |
51 | Speaker |
15 | Remote control |
| sensor |
31 | Height Adjustment |
| button |
31 | Adjustment foot |
56·57 Air filter/Intake vent
(on the bottom of the projector)
-12
