Sharp XG-C435X-L, XG-C465X-L Using the Remote Control, Usable Range, Inserting the Batteries

Models: XG-C435X-L XG-C465X-L

1 73
Download 73 pages 46.92 Kb
Page 17
Image 17
Using the Remote Control

Using the Remote Control

Introduction

Usable Range

The remote control can be used to control the projector within the ranges shown in the il- lustration.

Usable Range Note

The signal from the remote control can be re- flected off a screen for easy operation. How- ever, the effective distance of the signal may differ depending on the screen material.

When using the remote control:

Take care not to drop, expose to moisture or high temperature.

The remote control may malfunction under a fluorescent lamp. In this case, move the pro- jector away from the fluorescent lamp.

Front View

Remote control sensor

30°

30°

23' (7 m)

30°

Remote control signal transmitters

Remote control

Rear View

Remote control sensor

 

 

30°

30°

Remote control

signal transmitters

30°

23' (7 m)

Remote control

Inserting the Batteries

1 Pull down the tab on the cover and remove the cover towards the di- rection of the arrow.

2 Insert the batteries.

Insert the batteries making sure the po-

larities correctly match the Inserting the Batteries and 2 Insert the batteries. marks inside the battery compartment.

3 Insert the lower tab of the cover into the opening, and lower the cover until it clicks in place.

Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.

Manual background Caution

Danger of explosion if battery is incorrectly replaced. Replace only with alkaline or manganese batteries.

Insert the batteries making sure the polarities correctly match the Manual background and Manual background marks inside the battery compart- ment.

Batteries of different types have different properties, therefore do not mix batteries of different types.

Do not mix new and old batteries.

This may shorten the life of new batteries or may cause old batteries to leak.

Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak. Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove them using a cloth.

The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries.

Remove the batteries from the remote control if you will not be using the remote control for a long time.

Comply with the rules (ordinance) of each local government when disposing of worn-out batteries.

Manual background-15

Page 17
Image 17
Sharp XG-C435X-L, XG-C465X-L Using the Remote Control, Usable Range, Inserting the Batteries, Insert the batteries