Sharp XG-C465X-L Correcting Trapezoidal Distortion, Image Projection, Auto V-Keystone Correction

Image Projection

Correcting Trapezoidal Distortion

Auto V-Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.

The function for correcting trapezoidal distortion is called Keystone Correction.

This projector is equipped with an ÒAuto V-Key- stone CorrectionÓ function that automatically cor- rects any trapezoidal distortion within the pro- jected image. The correction is made automatically provided the vertical incline or decline is within ±12 degrees.

Note

•When not using the Auto V-Keystone Cor- rection function, set “Auto V-Keystone” on the “SCR-ADJ” menu to “Off”.

Manual Keystone Correction

When you want to make fine adjustments after the Auto V-Keystone Correction function has been acti- vated, or when you want to make corrections without using the Auto V-Keystone Correction function, you can make corrections manually using the following procedure.

1Press KEYSTONE on the remote control to enter the Keystone Correc- tion mode.

•You can also use KEYSTONE on the projector.

2Press ' or " to parallelize the

left and right sides, or press \ or to parallelize the upper and lower sides of the projected

image.

•You can also adjust the Keystone Cor- rection using the '/" and \/buttons on the projector.

3Press KEYSTONE.

•The on-screen display of the Keystone Correction mode will disappear.

•You can also use KEYSTONE on the projector.

KEYSTONE
button	MOUSE/Adjustment
	buttons ('/"/\/)
	RETURN button

"On-screen Display (Keystone Correction mode)

H&V KEYSTONE	H: 0	V: 0
END	ADJUST
TESTPATTERN	RESET

Vertical Keystone Correction (Adjustment with ' / ")

Horizontal Keystone Correction (Adjustment with \ / )

Note

•Press RETURN to return to the default set- ting.

•Straight lines or the edges of images may appear jagged while adjusting the image.

•The Manual Keystone Correction can be adjusted up to an angle of approximately ±50 degrees vertically and approximately ±30 degrees horizontally.

-32