Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
3 | 7 STANDBY/ON button | 7 | STANDBY |
| button | ||
6 | INPUT buttons | 3 | ON button |
|
| ||
6 | ENTER button |
|
|
5 Zoom knob
5 Focus ring
6 COMPUTER 1 button
4Tilt dial
4Height Adjustment buttons
1.Place the projector facing a screen
Page 18
2. Connect the projector to the computer and plug the power cord into the AC socket of the projector
When connecting equipment other than the computer, see pages 25, 28 and 29.
Pages 23, 30
3. Remove the lens cap and turn the projector on
On the projector | On the remote control |
Page 30
-16
