Image Projection
Switching the Input Mode
Select the appropriate input mode for the con- nected equipment.
Press COMPUTER1/2, DVI,
•When you press INPUT on the projector or DVI
on the remote control, the INPUT list appears. Press '/" to switch the INPUT mode.
Adjusting the Volume
Press VOL +/– on the remote control or
Note
•Pressing
•Pressing VOL+/+ will raise the volume.
•When the projector is connected to exter- nal equipment, the volume level of the ex- ternal equipment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/off or when changing the input signal.
•When you do not want to output the sound from the projector’s speaker while the pro- jector is connected to external equipment, set “Speaker” in
Displaying the Black Screen and Turning off the Sound Temporarily
Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound.
Note
•Pressing AV MUTE again will turn the pro- jected image back on.
VOL +/– (Volume) buttons
AV MUTE button
COMPUTER 1,
COMPUTER 2,
DVI,