Setup
Using the Adjustment Feet
The height of the projector can be adjusted using the adjustment feet at the front and back of the projector when the surface the projec- tor is placed on is uneven or when the screen is slanted.
The projection of the image can be made higher by adjusting the projector when it is in a location lower than the screen.
1Press HEIGHT ADJUST.
2Lift the projector to adjust its height and remove your finger from HEIGHT ADJUST.
3Rotate the adjustment feet at the back of the projector for fine adjustment.
Note
•When returning the projector to its original position, hold the projector firmly, press HEIGHT ADJUST and then gently lower it.
•The projector is adjustable up to approxi- mately 12 degrees on the front and 3 degrees on the back from the standard po- sition.
Info
•Do not press HEIGHT ADJUST when the adjustment foot is extended without firmly holding the projector.
•Do not hold the lens when lifting or lower- ing the projector.
•When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector.
HEIGHT ADJUST button
Adjustment foot
Adjustment feet
Up
Down
Connections and Setup
-27
