5Remove the lamp unit.
•Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow.
6Insert the new lamp unit.
•Press the lamp unit firmly into the lamp unit compartment. Fasten the secur- ing screws.
7Attach the lamp unit cover.
•Insert the tab of the lamp unit cover into the opening, and press the cover until it clicks in place.
Info
•If the lamp unit and lamp cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1Connect the power cord.
•Plug the power cord into the AC socket of the projector.
2 Reset the lamp timer.
•While pressing simultaneously 
, 
ON
and 
on the projector, press 
on the projector.
•“LAMP 100%” is displayed, indicating that the lamp timer is reset.
Info
•Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or explode.
Securing screw
User service screw
AC socket
INPUT button ENTER button
Power (ON) 
button 
UNDO buttom 
Appendix
