" On-screen display
Quick Start4. Adjust the angle

Adjust the projector angle:

• Shift the lens horizontally and vertically.

1 Press H&V LENS SHIFT on the projector or on the remote control.

2 Press ', ", \ or on the projector or the remote control.

• Adjust the projector angle by rotating the adjustment feet.

Pages 29, 30

5. Adjust the focus and the zoom

1 Press FOCUS +/– on the projector or on the remote control to adjust the focus. 2 Press ZOOM +/– on the projector or on the remote control to adjust the zoom.

Page 31

6. Correcting the image distortion due to the projection angle

1Press KEYSTONE on the projector or on the remote control.

2 Press ENTER on the projector or on the remote control.

3 Press ', ", \ or to move the position for the upper left of the image.

4 Press ENTER to set the position.

5 Repeat the same procedure with the positions for the upper right, lower right and lower left of the image.

•When the position of the lower left is set, the correction is made and the display disappears.

Page 32

7. Select the input mode

Press INPUT on the projector or COMPUTER1 on the remote control to select the “COMPUTER1” mode.

On the

On the remote

INPUT list

On-screen display (RGB)

projector

control

 

 

•When you press INPUT on the projector, the INPUT list appears. Press '/" to switch the INPUT mode and then press ENTER.

•When using the remote control, press COMPUTER1/2, DVI, HDMI, VIDEO or S-VIDEO to switch the input mode.

Page 36

8. Turn the power off

Press STANDBY on the projector or on the remote control. While the confirmation message is displayed, press STANDBY again.

•You can unplug the power cord even if the projector is operating.

•Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.

Page 28

-20