Audio Adjustment (“Audio” menu)
1
2
3
1Adjusting the Audio
This function allows you to adjust the projector’s audio.
Selectable items | Press \ | Press |
Balance | Increased audio from | Increased audio from |
| the left speaker | the right speaker |
Treble | For weaker treble | For stronger treble |
Bass | For weaker bass | For stronger bass |
Menu operation 
Page 47
Note
When the projector is connected to audio equipment:
•It is recommended that “FAO” be selected on “Audio Out”. Because the audio signal from the audio equip- ment does not vary in strength with the volume level of the projector, you can enjoy better sound.
•When “FAO” is selected on “Audio Out”, video and audio may not synchronize.
-When connecting audio equipment that has a function for adjusting audio delay time, adjust the delay time for synchronizing video and au- dio.
-When the audio equipment does not have such a function and the unsynchronized video and au- dio bothers you, select “VAO” on “Audio Out”. Selecting “VAO” synchronizes video and audio automatically.
•The HDMI audio will not output from the MONITOR OUT AUDIO terminal when the pro- jector is in the standby mode.
Note
•To reset all adjustment items, select “Reset” and press ENTER.
2Setting the Audio Output Type
This function determines whether the audio level output from the AUDIO OUTPUT terminal is fixed or variable by linking with VOLUME.
Selectable items | Description |
FAO | Audio output that does not vary in |
(Fixed Audio | strength with the volume level of the |
Output) | source projector. |
VAO | Audio output that varies in strength with |
(Variable | the volume level of the source projec- |
Audio Output) | tor. |
3Setting the Speaker
This function allows you to turn the audio output of the internal speaker on or off when the projector is connected to an external amplifier.
Selectable items | Description |
On | The audio signal is output from the internal |
| speaker. |
Off | The audio signal is not output from the |
| internal speaker. |
Note
•The HDMI audio will not output from the MONITOR OUT AUDIO terminal when the pro- jector is in the standby mode.
Features Useful
Info
•When “Audio Out” has been set to “VAO”, first make sure to lower the volume of the projector before turning the power on or off and when switching the input.
-55