Helpful Functions Set during Installation (“Options 2” menu)

1

2

3

4

5

6

7

8

9

0 q w e

rt y u

1Setting a Password

•There is no factory preset for the password, so the “Options 2” menu is enabled.

•If you do not want others to operate the “Options 2” menu, set a password.

1 Select “Password” from the “Options 2” menu, and press .

2Press ' or " to set the first digit in “New Password” and then press .

3Enter the remaining 3 digits and press ENTER.

4 Enter the same password in “Reconfirm” and press ENTER.

Info

Menu operation Page 47

Changing the password

1Press ', " and to enter the pass- word in “Old Password” and press

ENTER.

2Press ', " and to set the new password in “New Password” and press ENTER.

3Enter the same 4-digit password in “Reconfirm” and press ENTER.

Note

•If you do not want to set a password, leave the fields blank in steps 2 and 3 and press ENTER.

•To cancel the password settings, press UNDO.

If You Forget Your Password

If you forget the password, delete it using the following procedure and set a new password.

Press on the projector.

Features Useful

•The password must be entered to use the “Options 2” menu when a password has been set.

-61