Image Projection
1 Press H&V LENS SHIFT on the projector or on the remote control.
•Pressing ENTER on the projector or on the remote control displays the test pat- tern. Checking the test pattern is useful for more accurate adjustment.
2 Press ', ", \ or on the projector or the remote control to adjust the image position.
Note
•When UNDO is pressed, the lens shift reset screen is displayed. Lens shift can be reset to factory default with this screen.
H&V LENS SHIFT
button
Mouse/adjustment
button
('/"/\/)
ENTER button
UNDO button
H&V LENS SHIFT button
Adjustment button ('/"/\/)
ENTER button 
UNDO button
Using the Adjustment Feet
•When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment feet to adjust
the projected angle.
• The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.
• Install the projector so that it is as perpendicular to the screen as possible.
1 Rotate the adjustment feet to |
|
|
|
| |
adjust the projected angle. |
|
| Adjustment feet |
| |
• The projector is adjustable up to approxi- |
|
|
| ||
|
|
|
| ||
mately 5 degrees. |
|
|
|
| |
Warning! |
|
|
|
| |
• Do not hold the lens and lens cover when |
|
|
|
| |
projector angle is adjusted. |
|
|
|
| |
• Use caution not to pinch your finger in the | Down | Up | Up | Down | |
space between the adjustment foot and the | |||||
|
| ||||
projector when the projector angle is lowered. |
|
|
|
|
-30