Sharp XG-P610X, XG-P610X-N Resize Mode

This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose a desired image.

Resize Mode

Press RESIZE on the remote control.

•Pressing RESIZE changes the display as shown in the tables below.

•To return to the standard image, press UNDO while “RESIZE” is displayed on the screen.

•This function can also be accessed from the OSD menu (see page 56).

COMPUTER

Mouse/adjustment button ('/"/\/)

UNDO button

RESIZE button

	Main resolution	NORMAL	FULL	DOT BY DOT		BORDER	STRETCH
	SVGA (800 ⋅ 600)			800	⋅ 600
4:3 aspect ratio	XGA (1024 ⋅ 768)	1024 ⋅ 768	—		—	768 ⋅ 576
	SXGA (1152 ⋅ 864)			1152 ⋅ 864			1024 ⋅ 576
	SXGA+ (1400 ⋅ 1050)			1400	⋅ 1050	—
	SXGA (1280 ⋅ 1024)	968 ⋅ 768		1280	⋅ 1024	720 ⋅ 576
	1280 ⋅ 720	1024 ⋅ 576		1280 ⋅ 720
Other aspect ratios	1360 ⋅ 768	1024 ⋅ 578	1024 ⋅ 768	1360 ⋅ 768		—	—
	1366 ⋅ 768	1024 ⋅ 576		1366 ⋅ 768
	1280 ⋅ 768	1024 ⋅ 614		1280 ⋅ 768		960 ⋅ 576	1024 ⋅ 576
	1280 ⋅ 800	1024 ⋅ 640		1280 ⋅ 800		922 ⋅ 576

	Input signal			For 4:3 screen		For 16:9 screen
Computer		Image type	NORMAL	FULL	DOT BY DOT	BORDER	STRETCH
Resolution						*1
lower than
XGA
XGA				*2	*2
SXGA
							*1
(1152	⋅ 864)	4:3 aspect ratio
Resolution
higher than
SXGA
						*1
SXGA
(1280 ⋅ 1024)
		5:4 aspect ratio
1280	⋅ 720		*1
						*2	*2
1360	⋅ 768	16:9 aspect ratio
1366	⋅ 768
1280	⋅ 768		*1			*1	*1
1280	⋅ 800	16:10 aspect ratio

Operation Basic

: Cutout area on which images cannot be projected

: Area where the signals are off screen

*1 The Digital Shift function can be used for these images. *2 Same as NORMAL mode.

-39