3Shifting the Projected Image Vertically (Digital Shift)

For easier viewing, this function shifts the image projected on the screen up or down eliminating either the upper or lower black band found in 16:9 and other wide aspect ratios.

Press \

Press

Shifts the projected image

Shifts the projected image

down.

up.

Note

•This function will not work depending on the type of resize mode. See pages 39 and 40 for details.

4Setting On-screen Display

This function allows you to turn the on-screen messages on or off.

Selectable items

Description

Normal

All on-screen displays are displayed.

Level A

INPUT/VOLUME/MUTE/FREEZE/AUTO

 

SYNC/MAGNIFY/ “An invalid button has

 

been pressed.” are not displayed.

Level B

All on-screen displays are not displayed (ex-

 

cept the menu, H&V LENS SHIFT, KEY-

 

STONE, FOCUS, ZOOM, “All buttons on Pro-

 

jector are locked.” and warning displays).

 

 

Menu operation Page 47

5Setting the Video System

The video input system mode is factory preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal.

Selectable items

Description

PAL (50/60 Hz)

When connected to PAL video equipment.

SECAM

When connected to SECAM video equipment.

NTSC4.43

When reproducing NTSC signals in PAL

 

video equipment.

NTSC3.58

When connected to NTSC video equipment.

Note

•The video signal can only be set in VIDEO or S-VIDEO mode.

•When “Video System” is set to “Auto”, you may not receive a clear picture due to signal differ- ences. Should this occur, switch to the video system of the source signal.

•While “Video System” is set to “Auto”, when PAL-M or PAL-N signal is input, the image from PAL signal will be displayed.

6Capturing Projected Images

This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received.

Note

•When “Keylock Level” is set to “Level A” or “Level B”, pressing STANDBY displays “All buttons on Projector are locked.” regardless of the “OSD Display” setting.

Note

•Images can be captured only when they are from XGA (1024 ⋅ 768) non-interlace signals in COM- PUTER1/2, DVI or HDMI mode with “RESIZE” set to “Normal”.

•The saved image is reduced to 256 colors.

•Images from equipment connected to VIDEO or S-VIDEO terminal cannot be captured.

•Only one image can be captured and saved.

•The color of images may differ before and after saving if an image is captured on which image adjustment has been performed using the “C.M.S.” function.

•To delete the captured image, select “Delete”, and then press ENTER.

Features Useful

-57