Observe the following safeguards when setting up your projector.

Caution concerning the lamp unit

■Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center

for replacement.

See “Regarding the Lamp” on page 66.

Caution concerning the setup of the projector

■For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

Rest your eyes occasionally.

■Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

When using the projector in high- altitude areas such as mountains (at altitudes of approximately 1,200 meters (4,000 feet) or more)

■When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

■Use the projector at altitudes of 3,000 meters (10,000 feet) or less.

Warning about placing the projector in a high position

■When placing the projector in a high position, make certain it is carefully secure to avoid personal injury caused by the projector falling down.

Do not subject the projector to hard impact and/or vibration.

■Protect the lens so as not to hit or damage the surface of the lens.

Avoid locations with extremes of temperature.

■The operating temperature of the projector is from 41°F to 104°F (+5°C to +40°C).

■The storage temperature of the projector is from 14°F to 140°F (–10°C to +60°C).

Do not set up the projector in places exposed to direct sunlight or bright light.

■Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Caution regarding placing of the projector

■Place the projector on a level site within the adjustment range (10 degrees) of the adjustment foot.

■After the projector is purchased, a faint smell from the vent may appear when the power is first turned on. This is normal and is not a malfunction. It will disappear after the projector is used for a while.

Do not block the exhaust and intake vents.

■Allow at least 11 13/16 inches (30 cm) of space between the exhaust vent and the nearest wall or obstruction.

■Ensure that the intake vent and the exhaust vent are not obstructed.

■If the cooling fan becomes obstructed, a protection circuit will automatically put the projector into Standby mode to prevent overheat damage. This does not indicate a malfunction. (See pages 64 and 65.) Remove the projector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

8

Page 11 Page 13
Page 12
Image 12
Sharp XG-PH80W-N, XG-PH80X-N, XGPH80XN appendix Rest your eyes occasionally, Avoid locations with extremes of temperature
Page 11 Page 13

XGPH80XN, XG-PH80W-N, XG-PH80X-N specifications

The Sharp XG-PH80X-N and XG-PH80W-N are high-performance projectors designed to cater to the needs of both professional and educational environments. Renowned for their exceptional image quality and versatile features, these models offer a superior projection experience, making them suitable for a range of applications, including presentations, lectures, and even home cinema setups.

One of the standout features of the XG-PH80X-N and XG-PH80W-N is their impressive brightness, rated at 8,000 lumens. This high level of brightness ensures vibrant and clear images, even in well-lit environments. The projectors utilize advanced DLP technology, which enhances color accuracy and contrast, delivering crisp details and rich colors that engage audiences effectively.

The resolution capabilities of both models are noteworthy. While the XG-PH80X-N supports native XGA (1024 x 768) resolution, the XG-PH80W-N is designed for WXGA (1280 x 800), making it a suitable choice for widescreen presentations and content. This dual resolution support allows users to present images and videos with clarity and precision, providing a more immersive viewing experience.

Connectivity is another area where these projectors shine. The XG-PH80X-N and XG-PH80W-N come equipped with multiple input options, including HDMI, VGA, and USB ports, allowing for seamless integration with various devices. This versatility is essential for users who may switch between laptops, video players, and even mobile devices during presentations.

Portability is a key consideration for many users, and both models are designed with this in mind. The lightweight construction and compact design facilitate easy transport between different venues, making them ideal for traveling professionals or educators who frequently move between classrooms.

In terms of longevity and efficiency, these projectors are equipped with long-lasting lamp technology that ensures extended periods of use without the need for frequent replacements. Furthermore, their eco-friendly features help reduce energy consumption, making them a responsible choice for environmentally-conscious users.

In conclusion, the Sharp XG-PH80X-N and XG-PH80W-N projectors stand out for their impressive brightness, resolution options, versatile connectivity, and portability. Their advanced technologies and energy-efficient features make them the perfect choice for anyone seeking a reliable and high-quality projection solution for a wide range of applications.
Top Page Image Contents