Sharp XG-PH80W-N Using 3D Viewing Mode, Projecting 3D images, Ending 3D projection, Press 3D Mode

Using 3D Viewing Mode

Use the following procedure to project 3D images.

For operation of the 3D LCD shutter glasses and the 3D-video playback equipment, see the corresponding operation manual.

P/R buttons

(ENTER) button

3D MODE button

Projecting 3D images

1 Turn the projector on.

2Turn the 3D-video playback equipment on.

•Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation

manual.

3Switch the Input mode of the projector to enable input of 3D

video signals.

4Operate the 3D-video playback equipment and play back the 3D

content.

5Turn the 3D LCD shutter glasses

on and place them over your eyes.

6 Press 3D MODE on the remote control to display the 3D MODE menu.

7Press P or R to select “DLP® Link™”, and then select “On”.

8 Select “DLP® Link™ Invert”, and then press (ENTER) to switch the mode and enable more natural 3D image viewing.

Warning!

•If the projector, 3D-video playback equipment, and 3D LCD shutter glasses are not properly set, you may experience eye strain in addition to not being able to view the images in 3D.

9 Press 3D MODE.

• The 3D MODE menu will disappear.

Note

•If the images are not displayed in 3D, repeat steps 6 to 8.

•You can also use “DLP® Link™” and “DLP® Link™ Invert” on the menu screen to change the 3D setting.

Ending 3D projection

1Press 3D MODE on the remote

control to display the 3D MODE menu.

2Press P or R to select “DLP®

	Link™”, and then select “Off”.	Useful Features
3	Press 3D MODE.

• The 3D MODE menu will disappear.

Note

•You may not be able to enjoy the full 3D effects depending on the installation or usage environment of the projector.

•When you use the 3D projection function, it is recommended that “Lamp Mode” be set to “Both Lamps” and “Eco + Quiet” be switched to “Off”.

59