![](/images/new-backgrounds/1108320/108320117x1.webp)
Returning to the Default Settings
■All Reset
This function allows you to initialize the settings you have made in the projector.
Note
•The following items or menu cannot be initialized.
-Lamp Timer (Life)
-Filter Timer
-Image stored using “Image Capture”
■Filter Timer Reset
This function allows you to reset the filter timer.
Note
•Make sure to reset the fi lter timer after cleaning or changing the dust fi lter. (See page 62.)
Menu operation n Page 41
Information
You can confirm the following items.
Displayed | Description | |
items | ||
| ||
|
| |
INPUT | Used input terminal is displayed. | |
|
| |
Signal Info | Current input signal information is | |
| displayed. | |
|
| |
Lamp Timer | Lamp usage time and the remaining | |
(Life) | lamp life (%) are displayed (Both | |
| Lamp1 and Lamp2). See “Lamp Life” | |
| below. | |
Filter Timer | Filter usage time is displayed. | |
|
| |
Model Name | Model Name is displayed. | |
Software | Current software version is | |
Version | displayed. |
Lamp Life
Lamp usage condition | Remaining lamp life | ||
| “Life” | 100% | 5% |
|
|
|
|
Operated exclusively | Approx. | Approx. | |
with “Eco+Quiet” | 3,000 hours | 150 hours | |
set to “On” |
|
| |
|
|
| |
Operated exclusively | Approx. | Approx. | |
with “Eco+Quiet” | 2,000 hours | 100 hours | |
set to “Off” |
|
|
Note
•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.
•The lamp life may vary depending on the usage condition.
Features | Useful |
55