Sharp XGPH80XN Signal Adjustment SIG-ADJ Menu, Adjusting Computer Image, Setting the Resolution

Signal Adjustment (“SIG-ADJ” Menu)

Menu operation n Page 41

Picture	SIG-ADJ	Video	SCR-ADJ	PRJ-ADJ
H-Pos				0
V-Pos				0
Phase				0
Clock				0
Reset
Resolution				Auto
Auto Sync				Off
MENU = END		SEL./ADJ.	SEL.

1 Adjusting the

Computer Image

If the optimum image cannot be obtained with Auto Sync adjustment, use the SIG-ADJ function.

Selectable	Description
items
H-Pos	Centers the on-screen image by
	moving it to the left or right.
V-Pos	Centers the on-screen image by
	moving it up or down.
Phase	Adjusts horizontal noise (similar to
	tracking on your VCR).
Clock	Adjusts vertical noise.

Note

•To reset all adjustment items, select “Reset” and press (ENTER).

•The adjustable range of “H-Pos” (H-Position) and “V-Pos” (V-Position) may vary depending on the screen resolution of the computer.

3 Auto Sync (Auto Sync

Adjustment)

Selectable	Description
items
On	Auto Sync adjustment will occur when
	the projector is turned on or when the
	input signals are switched, when
	connected to a computer.
Off	Auto Sync adjustment is not
	automatically performed.

Note

•Auto Sync adjustment is also performed by pressing AUTO SYNC.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments.

2 Setting the Resolution

Selectable	Description
items
Auto	Input signal resolution is automatically
	recognized.
Wide	Set when the Wide signal is received.
4:3	Set when the 4:3 signal is received.

46