Connecting to a Computer Using a DVI Cable (Sold Separately)

Connect the projector to the computer using the DVI cable.

Note

•Select the input signal type of the video equipment. See page 64.

Optional

DVI cable

Type:AN-C3DV

accessory

(9'10'' (3.0m))

 

 

To DVI Digital output terminal

 

Desktop computer

DVI cable

(sold separately)

Connecting the thumbscrew cables

■Connect the thumbscrew cable making sure that it fits cor-

rectly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug.

■ Do not remove the ferrite core attached to the RGB cable.

Ferrite core

“Plug and Play” function

■This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup.

■Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

Note

•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA DDC compatible computer.

-22