Selecting the Economy Mode

Automatic Power Off

Function

When no input signal is detected for more than 15 minutes, the projector will automatically turn off if set to “ON”.

The Auto Power Off function will be disabled when it is set to “OFF”.

Select “Auto Power Off” in “Economy Mode” under the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 40 to 43.

Note

•When the Auto Power Off function is set to “ON”, 5 minutes before the power turns off, the message “Power OFF in X min.” will appear on the screen to indicate the remaining minutes.

•“Auto Power Off” is switched on and off by pressing .

Selecting the Transmission Speed (RS-232C)

This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the baud rate.

Selecting the Transmission Speed (RS-232C)

Select “RS-232C” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 40 to 43.

Note

•Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual for instructions for setting the computer’s baud rate.

-68