Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Note

•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

•For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

•A polarizing screen cannot be used with this projector.

Standard Setup (Front Projection)

■Place the projector at the required distance from the screen according to the desired picture size. (See page 29.)

Example of Standard Setup

Side View

90°

Top View

90°

•The distance from the screen to the projector may vary depending on the size of the screen.

P.29

• The default setting can be used, when placing the projector in front of the screen. If the projected image is reversed or inverted, readjust the setting to

Audience

“Front” for “PRJ Mode” in the “Options” menu.

 

 

P.69

•Place the projector so that an imaginary horizontal

line that passes through the center of the lens is perpendicular to the screen.

-28