Setting the Video System

The video input system mode is preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal differ- ence. In that case, switch the video signal.

Setting the VideoSystem

Select “Video System” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 40 to 43.

Note

•The video signal can only be set in IN- PUT 3 or INPUT 4 mode.

•In “Auto”, images are displayed in PAL even if PAL-N or PAL-M input signals are received.

PAL

When connected to PAL video equipment.

SECAM

When connected to SECAM video

 

equipment.

NTSC4.43

When reproducing NTSC signals in

 

PAL video equipment.

NTSC3.58

When connected to NTSC video equipment.

to Easy

Functions Use

-65