Selecting the Economy Mode

These functions allow you to reduce the power consumption of the projector.

Setting the Power Save

Select “Power Save” in “Economy Mode” under the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 40 to 43.

Note

•Although noise is reduced when “Power Save” is set to “ON”, brightness decreases by 20%.

•“Power Save” mode is factory preset to “OFF”.

•“Power Save” is switched on and off by pressing .

RS-232C Off Function

This projector consumes power when using a computer connected to the RS-232C terminal. When not using these terminals, “RS-232C Port” can be set to “OFF” to reduce standby power consumption.

Select “RS-232C Port” in “Economy Mode” under the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 40 to 43.

RS-232C connection is set to “ON”.

ON The RS-232C is operating at all times (to accept communications).

Status

Brightness

Power

consumption

 

 

ON

80%

220 W

(Low power

mode)

 

 

OFF

100%

270 W

(Standard mode)

 

 

 

to Easy

Functions Use

OFF

RS-232C connection is set to “OFF”. RS-232C does not operate when the power supply is in standby.

Note

•Set “RS-232 Port” to “ON” when using the SharpVision Manager Software.

•“RS-232S Port” is switched on and off by pressing .

-67