Specifications
Product type | Projector |
|
|
Model |
|
| |
Video system | NTSC 3.58/NTSC | ||
| DTV480I/DTV480P/DTV720P/DTV1080I | ||
Display method | DLP chip, RGB optical shutter method | ||
DLP panel | Panel size: 0.8" (XX mm) (XX [H] ⋅ XX [W] mm) | ||
| Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments | ||
| Drive method: Digital Light Processing (DLP™) | ||
| No. of dots: 921,600 dots (1,280 [H] ⋅ 720 [V]) | ||
Lens | |||
Projection lamp | 270 W SHP lamp |
| |
| Y (luminance signal): 1.0 | ||
| C (chrominance signal): Burst 0.286 | ||
Component input signal | RCA Connector (INPUT 1, 2) | ||
| Y: 1.0 | ||
| PB: 0.7 | terminated | |
| PR: 0.7 | terminated | |
Horizontal resolution | 520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input) | ||
RGB input signal | |||
| <Digital> |
| 50 Ω |
| Input impedance | ||
| Input level | ||
| <Analog> |
| 75 Ω |
| Input Impedance | ||
| Input level | ||
| <Synchronization signal> |
•Separate sync / Composite sync
Input level TTL level
Input impedance 1K Ω
•Green on sync
| Input level (Synchronising input) | ||
| Input Impedance 75 Ω | ||
Video input signal | RCA Connector: VIDEO (INPUT 4), composite video, 1.0 | ||
| terminated |
| |
Computer control signal | |||
Pixel clock |
| ||
Vertical frequency |
| ||
Horizontal frequency |
| ||
Rated voltage | AC | ||
Input current | 3.6 A |
|
|
Rated frequency | 50/60 Hz |
|
|
Power consumption (normal) | 365 W |
|
|
Power consumption(standby) | About 0.2 W (When using 100 V) | ||
Heat dissipation | 1,400 BTU/hour | ||
Operating temperature | 41°F to 95°F (+5°C to +35°C) | ||
Storage temperature | |||
Cabinet | Plastic |
|
|
I/R carrier frequency | 38 kHz |
|
|
Dimensions (approx.) | 18 11/16" ⋅ | 7" ⋅ | 15 49/50" (475 (W) ⋅ 178 (H) ⋅ 406 (D) mm) (main body only) |
| 18 11/16" ⋅ | 7" ⋅ | 19 1/2" (475 (W) ⋅ 178 (H) ⋅ 496 (D) mm) (including terminal cover) |
Weight (approx.) | 20.7 lbs. (9.4 kg) | ||
Supplied accessories | Remote control, Two AA size batteries, Power cord (11'10", 3.6 m), Terminal cover, Lens cap | ||
| (attached), SharpVision Manager Software | ||
| SharpVision Manager operation manual | ||
Replacement parts | Lamp unit (Lamp/cage module) |
AAsize batteries , Power cord (CACCDA010DE01), Terminal cover (CCOVA1985CE02), Lens cap (PCAPHA1056CESA), SharpVision Manager Software
This SHARP projector uses a DMD Chip. This very sophis- | This unit has some inactive pixels within acceptable toler- | |
ticated panel contains 921,600 pixels. As with any high tech- | ances which may result in inactive dots on the picture screen. | |
nology electronic equipment such as large screen TVs, video | This will not affect the picture quality or the life expectancy | |
systems and video cameras, there are certain acceptable | of the unit. If you have any questions about this matter, | |
tolerances that the equipment must conform to. | please call toll free | |
|
|
|
Specifications are subject to change without notice. | U.S.A ONLY | |
|
Appendix