Sherwood R-904N manual System, Setup, 1, Turn the setup menu on

•	I R-904_(A)	_	E_G	_	09Z007:R-904_(A)	2009-Z0-Z4	_	J_lo_y¢_
							o$	Z:53 ..... :I,>,_

	System	Setup
	. The setup menu is displayed on the fluorescent and allows you to perform the setup procedures easily. In most situations, you will
/!	only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
	The setup menu consists of 4 main menus; SYSTEM, SET ROOM EQ, SPEAKER SETUP and MULTI ROOM SETUP.
	These menus are then divided up into various sub-menus.
	1, Turn the setup menu on.
	EE3 _	EE3 E]B

SETUP

©

ASSIGN -- _RROUNO-- ST_F_E_

. The setup menu will be shown.

. To turn the menu off, press this button again.

IINotes:

. When the VuNow is selected as an input source, the system setup cannot be performed.

2, Select the desired menu using the CURSOR UP/DOWN buttons.

. When selecting "SYSTEM", see "SETTING THE SYSTEM" on page 48.

. When selecting "SET RMEQ", see "SETTING THE ROOM EQ" on page 49.

. When selecting "SPK SET", see "SETTING THE SPEAKER SETUP" on page 50.

. When selecting "MLT ROOM", see "SETTING THE MULTI ROOM SETUP" on page 54.