Sherwood R-904N manual Using a punch=through function

•	I R-904_(A)	_	E_O	_	09Z007:R-904_(A)	2009-Z0-Z4	_	J_1o_/€_
							o$	Z:53 ..... :I,>,_,

Using a punch=through function

This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the 8 components controlled by this remote control.

For example, since this receiver will likely be used as the sound system while watching TV, you may want to adjust

this receiver's volume although this remote control is set to control the TV.

,When programming this remote control for the AUDIO

volume punch-through, press and hold down both "AVR" button and "VOLUME +" button for more than 1 second.

mRemoving a punch-through function

. When removing the AUDIO volume punch-through, press

and hold down both "AVR" button and "VOLUME _''button !/ for more than 1 second.

® o ®

® o ®

,If programming is performed successfully, the SET LED will flicker twice.

,When you want either TV volume or TV channel punch-through, press and hold down both "TV" button and either "VOLUME +" or "CH /'," button for more than 1 second.

mNote :

- If you use one of AUDIO and TV volume punch- through functions, you cannot use the other.

,If removing is performed successfully, the LED will flicker twice.

,When you want to remove either TV volume or TV channel punch-through, press and hold down both "TV" button and either "VOLUME -"or "CH v" button for more than 1 second.

mRemoving all punch-through functions

Press and hold down both "AVR" button and "AUDIO ASSIGN" button for more than 1 second.

4-

0

ASSIGN

AUDIO

Q,RPT

AUOlO _ su_ou D --

qRPT 'LAY OST PLAY M

. If removing all punch-through functions is performed successfully, the LED will flicker twice.