Sherwood R-904N manual ild fl, Adjusting the current channel level

•IR-.904N(A)_ENG_09100T:R200-.904N(A). -10-14-_ 1:53j_]c_

Adjusting the current channel level

,After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. (For details, refer to "When selecting the CHANNEL LEVEL" on page 52.)

1.Select the desired channel.

CH.LEVEL

©

il'd fl 6

. Each time this button is pressed, the channel is selected as follows:

Front	Center	Front	Surround		Surr. Back	Surr. Back I
i Left	-_ C	-_ Right	-_	Right	Right	Left
				SR _	(SBR _	SBL)---]
		SW	*-	SL	_	/
	Subwoofer			Surround Left

( ) : Possible only when the surround back speaker is set to 2ch ("x2") or lch ("xl")

*When the channel level disappears, press this button again.

, Depending on the speaker settings ("NO"), etc., some channels cannot be selected.

2, Adjust the level of the selected channel as desired.

.The channel levels can be adjusted within the range of -15~ +15 dB.

IlNote:

.When selecting the VuNow as an input source, you cannot adjust the channel levels.

3, Repeat the above steps 1 and 2 to adjust each channel level.