•
_ SETTING THE SPEAKER SETUP
J
/! | oAfter you have installed this receiver and connected all the components, you should adjust the speaker settings for the | |
optimum sound acoustic according to your environment and speaker layout. | ||
o Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the | ||
speaker settings, | too. | |
o When performing the Room EQ setup procedure, you need not perform the SPEAKER CONFIGURATION, the CHANNEL | ||
LEVEL and the SPEAKER DISTANCE procedures. (For details, refer to "SETTING THE ROOM EQ" on page 49.) | ||
• SPK SET | F: _/SMALL |
SPK CFG
X.OVER
CH LEVEL
DISTANCE
c @,SMALL,NO
S _E/SMALL | / NO | ||
SB : | LX1 / SX2 / | SX1 / NO | |
SW : YES / | / NO |
| |
X.OVER | : 50 / 80/_/150 | / 200 | |
T. TONE:_/A- |
|
--
--
--
--
--
--
--
L:;0 FT/0.1 ~ 30.0
C :_FT/0.1 ~ 30.0
R :_FT/0.1 ~ 30.0
SR :_FT/0.1 ~ 30.0
SBR :_FT | / 0.1 ~ 30.0 |
SBL: FT/O,~300
SL :_FT / 0.1 ~ 30.0
SW :_FT/0.1 ~ 30.0
o SPK CFG (SPEAKER CONFIGURATION) : To adjust the speakers depending on whether they are connected or not.
o X.OVER (CROSSOVER FREQUENCY) : To select the desired crossover frequency.
o CH (CHANNEL) LEVEL : To adjust each channel level with the test tone.
o DISTANCE (SPEAKER DISTANCE) : To select the distance between the listening position and each speaker to set the delay time automatically for optimum surround playback.