• | I | _ | E_O | _ | _ | J_lo_y¢_ | ||
|
| o$ | Z:53 ..... :I,>,, |
6, CONNECTING SPEAKERS
/! | . Be sure to connect speakers firmly and correctly | |
according to the channel(left and right) and the | ||
polarity (+ and | ||
sound will be heard from the speakers, and if the | ||
polarity of the speaker connection is incorrect, | ||
the sound will be unnatural and lack bass. | ||
. When using | only one surround back speaker, | |
| you should connect it to SURROUND BACK! | |
| ROOM2 LEFT channel. | |
| . Because this receiver cannot drive the surround | |
| back speakers and the ROOM2 speakers | |
| simultaneously, you should assign their power | |
| amplifier correctly depending on how to use | |
| them. (For details, refer to "CONNECTING | |
| ROOM2 SPEAKERS" on page 9 and "When | |
| selecting the AMP ASSIGN" on page 48.) | |
| . For installing the speakers, refer to "Speaker | |
| placement" | on page 9. |
| . After installing the speakers, first adjust the | |
| speaker settings according to your environment | |
| and speaker layout. (For details, refer to | |
| "SETTING THE ROOM EQ" on page 49.) |
Caution :
*Be sure to use the speakers with the impedance of 6 ohms or above.
*Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/oF the speakers.
*Never touch the speaker terminals while the AC input cord is connected to the wall AC outlet. Doing so could result in electric shocks.
s ............................
Front Front
rightleft
\
Center
|
|
| 0 |
Surround | Surround | Surround | Surround |
right | left | back right | backleft |
reConnecting | speaker | wire |
|
|
|
|
| |
1. Strip | away | approx. | 10 mm | 2. Loosen | by turning | the | 3. Insert the bare part of the | 4. Tighten by turning it |
(3/8 | inch) | of wire insulation, | speaker | terminal | counter- | wi re. | clockwise. | |
then | twist | the wire ends | clockwise. |
|
|
|
tight.