• | I | _ | E_O | _ | _ | J_lo_/€_ | ||
|
| o$ | Z:53 ..... :I,>.... |
_ SETTING THE SYSTEM | j |
0 SYSTEM |
|
TONE :_/ON |
PWR:-M/60/36/16/ON L__BASS:/-16- +16
. AMP (AMP ASSIGN) • To assign the surround back channels' power amplifier correctly depending on how to use the speakers.
. TONE • To adjust the tone (bass and treble) as desired.
.
1, Press the CURSOR UP/DOWN buttons to select the desired item.
2, Press the CURSOR LEFT/RIGHT buttons to set the selected item as desired.
mWhen selecting the AMP ASSIGN
.The surround back channels' power amplifier can drive the surround back speakers or the ROOM 2 speakers. Depending on how to use the speakers, you should assign the power amplifier correctly. (For details, refer to "CONNECTING SPEAKERS" on page 8 and "CONNECTING ROOM2 SPEAKERS" on page 9.)
BACK (SURROUND BACK) • To drive the surround back speakers when connecting the SURROUND BACK!ROOM2 channels to them.
R2 (ROOM2) • To drive the ROOM2 speakers when connecting the SURROUND BACK!ROOM2 channels to them.
mWhen selecting the TONE
OFF • To listen to a program source without the tone effect. ("DIR" lights up.)
$
ON • To adjust the tone for your taste. ("DIR" goes off.)
OWhen the TONE CONTROL is set to ON to adjust the tone (bass and treble) _1). Press the ENTER button to enter the tone adjustment mode.
* Then "TRE ~" will be displayed.
_2_.Press the CURSOR UP/DOWN buttons to select the desired tone mode.
G). Press the CURSOR LEFT/RIGHT buttons to adjust the selected tone as desired.
*The tone level can be adjusted within the range of
*In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).
*Extreme settings at high volume may damage your speakers.
*To complete tone adjustment, repeat the above steps _) and _).
mWhen selecting the POWER MANAGER
60 / 30 / 10 : If the specified period of time elapses after selecting the input source other than VuNow, the VuNow circuitry will
%FF : To turn on the VuNow circuitry constantly when this unit is turned on. | |
$ | be turned off. |
ON : To turn on the VuNow circuitry when the VuNow is selected as an input source.