ENGLISH
O PERATING COMPONENTS WITH 
Enter the setup code for each component
1 you wish to control. For details, refer to “ENTERING A SETUP CODE” (Page 13).
REMOTE CONTROL
•The operating range of the remote control is about 23 feet (7 Meters) and it will operate at angles of up to 30 degrees. Aim the remote at the remote sensor.
Turn on the component you want to
2 operate.
Press the COMPONENT button on the
3 remote control corresponding to the component you wish to operate.
AUDIO/VIDEO RECEIVER | T D A S |
MULTI CONTROL | MASTER VOLUME |
Aim the remote control at the REMOTE
4 SENSOR of the component you wish to control and press the button corresponding to the operation you want.
•When operating a Sherwood CD player or tape deck using this system remote control, aim the remote control at the REMOTE SENSOR of this receiver.
•However, to operate a Sherwood DVD player or MD recorder, aim at the REMOTE SENSOR of the corresponding component.
LOADING BATTERIES
7m
30 |
| 30 |
|
| PWR |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 |
|
VOL |
| CH LEVEL |
ENTER
HOME THEATER MASTER
•Replace the batteries when the LED lamp flickers twice when any button is pressed.
•Replacing the batteries will restore proper operation and the memorized contents will be retained.
1 | Remove the cover. | 2 | Load 2 “AA”batteries(1.5 V) matching the |
| polarity. | ||
|
|
|
|
1 2
