Sherwood R-956 manual Presetting radio stations, Tuning to preset stations

ENGLISH

						Press the MEMORY/ENTER button.
Presetting radio stations					2
You can store up to 30 preferred stations in the								MEMO/ENTER
memory.
Tune in the desired station with auto or
1 manual tuning.					“MEMORY” flickers for 5 seconds.
Select the desired preset number (1~30)						Repeat the above steps 1 to 3 to memorize
3 and press the MEMORY/ENTER button.					4 other stations.
	MULTI CONTROL			MEMO/ENTER
DOWN			UP
When using the NUMERIC buttons on the remote					MEMORY BACKUP FUNCTION
					The following items, set before the receiver is turned
control.					off, are memorized.
Examples)
					INPUT SELECTOR settings
For “3” :
	3				Surround mode settings
	within 2 seconds				Preset stations, etc.
For “15” :
	1		5		Note : If the electricity fails or the AC input cord is
The station has now been stored in the memory.
					disconnected for about 2 weeks. All memorized
When using the NUMERIC buttons, the station is
					functions will be lost. Please enter them into
stored automatically without pressing the MEMORY/
					memory again.
ENTER button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If “MEMORY” goes off, start again from step 2,
above.
						Select the desired preset number.
Tuning to preset stations					2
							MULTI CONTROL
After selecting the tuner as input source,
1 select the preset tuning mode.						DOWN		UP
		TUNING/PRESET			When using the NUMERIC buttons on the remote
		MODE
					control.
					Examples)
					For “3”:	3
						within 2 seconds
					For “15”: 1			5
Then “PRESET” lights up.					When selecting the desired preset number with the
					NUMERIC buttons, the desired preset station will be
					tuned to automatically without first selecting the preset
					tuning mode.

2 4