Operations, Before operation | Sherwood R-963 specs

ENGLISH

Operations

Notes : Before operating this receiver with the supplied remote control, refer to “ Universal Remote Controls” on page 11 for details about operation.

Before operating this receiver, first set this unit as desired for optimum performance, by using the OSD menu setting procedures. (For details, refer to “OSD Menu Settings” on page 35.)

LISTENING TO A PROGRAM SOURCE

Before operation

• Enter the standby mode.	POWER
	ON / OFF

•The STANDBY button lights up in red. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the memorized contents and operation readiness.

•To switch the power off, push the POWER switch again.

•Then power is cut off and the STANDBY button goes off.

In the standby mode, turn the power on.

POWER

STANDBY

ON/STANDBY

1 2 3

4 5 6

7 8 9

•Each time the STANDBY button on the front panel or the POWER button on the remote control is pressed, the receiver is turned on to enter the operating mode(the STANDBY button lights up in blue) or off to enter the standby mode (the STANDBY button lights up in red).

•In the standby mode, if one of the INPUT SELECTOR buttons is pressed, the receiver is turned on automatically and the desired input is selected.

2	Switch the desired front	SPEAKER
2	speakers on.	A/B

•Each time this button is pressed, the speaker mode changes as follows and the sound can be heard from the speakers connected to the selected front speaker terminals:

Front A(	)	Front B(	)
Off	Front A and B(		)

•When using the headphones for private listening , select the Off mode to switch off the front speakers and all the others.

Select the desired input source.

3	INPUT SELECTOR	OSD	POWER
3	INPUT SELECTOR	OFF
AUDIO	VIDEO TAPE MON.

•Each time the “AUDIO” button is pressed, the input source changes as follows:

PHONO TUNER CD AUX

(frequency display)

•Each time the “VIDEO” button is pressed, the input source changes as follows:

	VIDEO 1 VIDEO 2 -------	VIDEO 5

•When the TAPE MONITOR button is set to on so that “TAPE MON” lights up, other inputs can not be heard from the speakers.

To listen to an input source except TAPE MONITOR, be sure to set the TAPE MONITOR button to off.

TAPE MONITOR function

You can connect either a tape deck or a graphic equalizer to the receiver’s TAPE MONITOR jacks.

Only when you listen to the component connected to these jacks, set the TAPE MONITOR button to on.

If you connect a 3-head tape deck, you can listen to the sound being recorded during recording, and not the source sound. For further details, refer to the operating instructions of the connected component.

When selecting the 7.1 CH DIRECT as desired

	OSD	POWER
7.1CH DIRECT	OFF

•Depending on the power amplifier setting for the surround back channels and the surround back speaker setting, “7.1(,6.1 or 5.1) CH DIRECT” is displayed and the 8(/7/6) separate analog signals from the component connected to this input pass through the tone, volume and bass management(if selected) circuits only and can be heard from your speakers.(In case that the TAPE MONITOR button is set to on, the TAPE MONITOR button is automatically set to off.)

•Press the 7.1 CH DIRECT button or select the desired input source to cancel the 7.1 CH direct function.

•These analog signals can be heard only. They cannot be recorded.

R-963 specifications

The Sherwood R-963 is a standout receiver in the competitive audio equipment landscape, renowned for its blend of traditional craftsmanship and cutting-edge technology. This model exemplifies Sherwood's commitment to high-fidelity sound, making it a popular choice among audiophiles and casual listeners alike.

One of the defining features of the R-963 is its robust power output, delivering 100 watts per channel across a wide frequency range. This ensures that listeners experience rich sound dynamics, whether enjoying quiet acoustic tracks or the thunderous crescendos of orchestral material. The receiver is designed to accommodate a variety of speaker configurations, supporting both 2-channel and multi-channel setups, which allows it to cater to personal preferences and home theater requirements.

The R-963 is equipped with an array of connectivity options, reflecting the demands of modern audio environments. It includes multiple HDMI inputs, allowing seamless connections to a range of devices, from Blu-ray players to gaming consoles. Additionally, the receiver supports 4K passthrough, ensuring high-definition content is transmitted without loss of quality. For those who enjoy streaming, the built-in Bluetooth capability allows wireless music playback from smartphones and tablets, enhancing convenience and flexibility.

Another notable technology in the R-963 is its advanced audio processing features. The receiver utilizes digital signal processing (DSP) to optimize sound quality, enabling users to select various audio modes that enhance music and movie watching experiences. Surround sound capabilities are also integrated, offering immersive audio that replicates a theater-like atmosphere at home.

User-friendly controls and a clear display make the R-963 accessible for all users. The ergonomic remote control allows effortless navigation between functions, settings, and sources, making the operation enjoyable. Additionally, compatibility with multi-room audio systems means that users can enjoy their favorite tunes in various rooms simultaneously.

In summary, the Sherwood R-963 receiver combines powerful performance with versatile connectivity and modern technologies. Its robust build quality, user-friendly interface, and exceptional audio capabilities make it an excellent choice for anyone looking to elevate their listening experience, whether it be through music playback or movie soundtracks.

Sherwood R-963 manual Operations, Before operation

Models: R-963