Sherwood R-963 manual Connecting MULTI-ROOM System KIT

■ROOM 2 connections

Another room

S-VIDEO IN

VIDEO IN

Monitor TV

	VIDEO IN	S-VIDEO
		IN
AUDIO IN	A/V receiver
	or amplifier

or

Speakers

leftright

Speakers

•If another A/V receiver or integrated amplifier, etc. is connected to these jacks, you can play a different program source in another room as well as one source in the main room at the same time.(For details, refer to "ROOM 2 SOURCE PLAYBACK" on page 34).

•However, in case that you do assign the power amplifier for the surround back channels to the ROOM 2 and install the speakers connected to these channels in another room, you need not use the power amplifier to drive the speakers additionally in another room. (For details, refer to "SETTING THE POWER AMP ASSIGN" on page 37.)

•When the multi-room system kit is connected, the ROOM 2 function is more convenient.

Note:

•To minimize hum or noise, use high quality connection cords.

■CONNECTING MULTI-ROOM SYSTEM KIT

OUT

Adaptor (Multi-room system kit)

CENTER	FRONT B SPEAKERS
SPEAKER

Another room

IR receiver	ROOM 2 remote
(Multi-room system kit)	control unit

•To control this unit from a remote location, connect this jack to the output of the multi-room adaptor.

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.

8