Sherwood R-963 manual Room 2 Source Playback, Room 2 source

ENGLISH

ROOM 2 SOURCE PLAYBACK

This function allows enjoying one source in the main room and playing another in a different room at the same time.

The analog signals from the 7.1 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the ROOM 2 OUTs, meaning no playback in a different room.

When you connect the multi - room adapter to the MULTI - ROOM jack of this unit, you can control this unit with not only the universal remote control unit but also the ROOM 2 remote control unit in a different room, too.(For details, refer to “CONNECTING MULTI - ROOM SYSTEM KIT” on page 8 and “ROOM 2 Remote Controls” on page 17.)

When using the ROOM 2 remote control unit					When using the universal remote control unit or the
You can use the ROOM 2 function with the ROOM 2					buttons on the front panel.
remote control unit more conveniently.					1	Press the ROOM 2 button.
1	Press the ROOM 2 button.		ROOM2
				AUDIO
				VIDEO
						ROOM2 FEED
“R2” is flickering for 3 seconds and the							MAIN
						VOL		CH
ROOM 2 function is activated.						or
To cancel the ROOM 2 function, press it again.									ROOM 2
						1	2	3	ENT
Then “R2” goes off.						4	5	6
						7	8	9
In the operating mode, when one of the ROOM 2 INPUT							0
						MI	M2	M3
SELECTOR buttons on this remote control is pressed, the
ROOM 2 function is automatically activated without pressing					“R2” flickers for 3 seconds and the ROOM 2 function is
the ROOM 2 button and the desired input is selected.					activated.
					To cancel the ROOM 2 function, press the button.
					Then “R2” goes off.
2	Select the desired	PHONO	CD	TUNER	You can cancel the ROOM 2 function with using these
	input as a ROOM 2			AUDIO	buttons even in the standby mode.
	source.	AUX		AUDIO
		VIDEO 1	VIDEO 2
				VIDEO 3
				VIDEO
		VIDEO 4	VIDEO 5	VIDEO	2	Select the desired input as a ROOM 2 source
						while “R2” is flickering.
The selected ROOM 2 source is displayed for 3 seconds as						OSD			POWER
						OFF
follows: (R2) PHONO, (R2) TUNER, (R2) CD, (R2) AUX,						AUDIO VIDEO
(R2) VIDEO 1~5.						or
Only these sources can be played in another room.
When an audio program source is selected as a ROOM 2
source, the image of the video program source selected
previously can be played separately, too.(For details, refer to
“SETTING THE ROOM2 FEED SETUP” on page 50.)
The MUTE and VOLUME UP/DOWN(				) buttons on this	The selected ROOM 2 source is displayed for 3 seconds.
remote control can be available for the ROOM 2 source only.					Only while “R2” is flickering, the volume level for the
Note:					ROOM 2 source can be adjusted.
When the muting effect for the ROOM 2 source is operating,					When “R2” is not flickering and lights up, press the ROOM
“R2” is flickering.					2 button briefly twice.
3	Start play on the component related to the				3	Start play on the component related to the
	ROOM 2 source.					ROOM 2 source.

Notes:

Even when this unit enters the standby mode, in such a case that “R2” lights up still and the STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

When the ROOM 2 function is operating in the standby mode, only the ROOM 2 remote control unit is available. When you do not use the ROOM 2 function, cancel the ROOM 2 function to save electricity.

For ROOM 2 volume adjustment, refer to “ SETTING THE ROOM 2 FEED SETUP” on page 50.

34