Sherwood R-963 manual When selecting the Speaker Distance

4	Repeat the above steps				and until the speakers are all set to the desired mode.
When selecting the SPEAKER DISTANCE
1	Press the CURSOR UP(				)/DOWN(	) buttons to select the SPEAKER DISTANCE, then press the
	ENTER button.
						S P E A K E R D I S T A N C E
						U N I T	: Meters
	PAGE	MAIN				F R O N T L	: 3 . 0 m
	VOL		CH			F R O N T R	: 3 . 0 m
						C E N T E R	: 3 . 0 m
						S U R R . L	: 3 . 0 m
	1	2	3			S U R R . R	: 3 . 0 m
	4	5	6			R E T U R N : B a c k	, : S e l e c t
	7	0	9
		8
	MI	M2	M3
2	Press the CURSOR UP(				)/DOWN(	) buttons to select the unit.
						Then “ ” and “ ” are moved to the unit mode.
	PAGE		MAIN
	VOL			CH
	1		2	3
	4		5	6
	7		8	9
			0
	MI		M2	M3
3	Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired unit.
						Each time these buttons are pressed, “Meters” or “Feet” is
	PAGE		MAIN			selected.
	VOL			CH		Once a unit is selected, the distances are automatically
						changed in the selected unit.
	1		2	3
	4		5	6
	7		8	9
			0
	MI		M2	M3
4	Press the CURSOR UP(				)/DOWN(	) buttons to select the desired speaker.

Then “ ” and “ ” are moved to its distance.

You cannot select the subwoofer, surround back speakers and the speakers set to “None”.

5	Press the CURSOR LEFT( )/RIGHT( ) buttons to enter the distance from the selected speaker to the
	listening position.

You can set the distance within the range of 0.3~9 meters in 0.3 meter intervals(or 1~30 feet in 1 feet intervals)

Repeat the above steps and until the distances are all entered.

6

ENGLISH

39